« previous next »
Pages: [1]   Go Down

Author Topic: welder needed  (Read 449 times)

0 Members and 1 Guest are viewing this topic.

schannell77

  • Am Poster
  • *
  • Posts: 29
    • View Profile
welder needed
« on: February 12, 2014, 10:23:05 pm »
a friend recently agreed to let me use one of his baskets to put in my yard to practice. the feet are broken  off the center pole. i need someone  with a welder or access to a welder who could fix it for a bare minimum of cost or free. any  help would be appreciated.
Logged
Never trust someone who doesn't like Pink Floyd.



KCFDC #1669

eeastwood

  • Pro Poster
  • **
  • Posts: 389
    • View Profile
Re: welder needed
« Reply #1 on: February 12, 2014, 10:47:18 pm »
What kind of basket? Can you post a picture?
Logged

LKillian

  • Am Poster
  • *
  • Posts: 197
    • View Profile
Re: welder needed
« Reply #2 on: February 13, 2014, 08:45:05 am »
Its an old lightning basket with their standard circular base. It has 3 supports running from the center to the outer ring. 2 of the supports are broken where it meets the outer ring. Looks like I had snapped the old welds actually. Probably just needs a couple of easy spot welds to reattach those to the outer ring.
Logged
Cooter was here.

Kevin Montgomery

  • Administrator
  • 1000 Rated Poster
  • *****
  • Posts: 2809
  • Nice shot!
    • View Profile
    • http://kcfdc.org
Re: welder needed
« Reply #3 on: February 13, 2014, 09:00:27 am »
Quote from: LKillian on February 13, 2014, 08:45:05 am
Its an old lightning basket with their standard circular base. It has 3 supports running from the center to the outer ring. 2 of the supports are broken where it meets the outer ring. Looks like I had snapped the old welds actually. Probably just needs a couple of easy spot welds to reattach those to the outer ring.

Is it a DB5 with the removable base? If so, I have a base for it.
Logged
Kevin Montgomery
Eschew Obfuscation
KCFDC #117
PDGA# 12037
http://www.kcfdc.org

schannell77

  • Am Poster
  • *
  • Posts: 29
    • View Profile
Re: welder needed
« Reply #4 on: February 13, 2014, 10:32:38 am »
yeah what Lee said.
Logged
Never trust someone who doesn't like Pink Floyd.



KCFDC #1669

eeastwood

  • Pro Poster
  • **
  • Posts: 389
    • View Profile
Re: welder needed
« Reply #5 on: February 13, 2014, 10:48:16 am »
Could you just put a pole in the ground and slide it over?
Logged

LKillian

  • Am Poster
  • *
  • Posts: 197
    • View Profile
Re: welder needed
« Reply #6 on: February 13, 2014, 12:59:56 pm »
Quote from: Kevin Montgomery on February 13, 2014, 09:00:27 am
Quote from: LKillian on February 13, 2014, 08:45:05 am
Its an old lightning basket with their standard circular base. It has 3 supports running from the center to the outer ring. 2 of the supports are broken where it meets the outer ring. Looks like I had snapped the old welds actually. Probably just needs a couple of easy spot welds to reattach those to the outer ring.

Is it a DB5 with the removable base? If so, I have a base for it.

That's what it is Kevin. What are you wanting for it?
Logged
Cooter was here.

LKillian

  • Am Poster
  • *
  • Posts: 197
    • View Profile
Re: welder needed
« Reply #7 on: February 13, 2014, 01:03:47 pm »
Quote from: eeastwood on February 13, 2014, 10:48:16 am
Could you just put a pole in the ground and slide it over?

That would work too eric, but trying to keep it portable so I can let my bud get some practice in.

He needs it! ;D
Logged
Cooter was here.

Kevin Montgomery

  • Administrator
  • 1000 Rated Poster
  • *****
  • Posts: 2809
  • Nice shot!
    • View Profile
    • http://kcfdc.org
Re: welder needed
« Reply #8 on: February 13, 2014, 01:19:08 pm »
Quote from: LKillian on February 13, 2014, 12:59:56 pm
Quote from: Kevin Montgomery on February 13, 2014, 09:00:27 am
Quote from: LKillian on February 13, 2014, 08:45:05 am
Its an old lightning basket with their standard circular base. It has 3 supports running from the center to the outer ring. 2 of the supports are broken where it meets the outer ring. Looks like I had snapped the old welds actually. Probably just needs a couple of easy spot welds to reattach those to the outer ring.

Is it a DB5 with the removable base? If so, I have a base for it.

That's what it is Kevin. What are you wanting for it?

PM Sent....
Logged
Kevin Montgomery
Eschew Obfuscation
KCFDC #117
PDGA# 12037
http://www.kcfdc.org
Pages: [1]   Go Up
« previous next »