Author Topic: Down Under Work Day 11-27-09///New Pin placements//Tee Boxes  (Read 1946 times)

0 Members and 1 Guest are viewing this topic.

bbman

  • Moderator
  • Pro Poster
  • *****
  • Posts: 263
    • View Profile
Down Under Work Day 11-27-09///New Pin placements//Tee Boxes
« on: November 21, 2009, 10:18:39 AM »
Come out and work some of that Turkey dinner off, the day after Thanksgiving.

Friday 11-27-09 9am till at least 12 noon.

1. New pin placements on a few holes. I will bring all the materials for this. ;D ;D
2. Many buckets of sand as well.
3. Cut a few dead trees out, these are becoming a hazard and will fall shortly.
4. Trash

Hope all of you can make it, this will speed this process up alot.

Bring shovels, pick axes, wheel barrels, chain saws.

See you Friday at 9am.

Thanks

Brad Berve
Rosedale Down Under CC 2010

Keizer

  • Guest
Re: Down Under Work Day 11-27-09///New Pin placements//Tee Boxes
« Reply #1 on: November 23, 2009, 10:53:47 AM »
Brad, are you using flush-mount sleeves for the new positions or switching over to Cashen-style sleeves? Just curious is all...

bbman

  • Moderator
  • Pro Poster
  • *****
  • Posts: 263
    • View Profile
Re: Down Under Work Day 11-27-09///New Pin placements//Tee Boxes
« Reply #2 on: November 23, 2009, 11:02:26 AM »
Flush mount with a chain.
Rosedale Down Under CC 2010

bbman

  • Moderator
  • Pro Poster
  • *****
  • Posts: 263
    • View Profile
Re: Down Under Work Day 11-27-09///New Pin placements//Tee Boxes
« Reply #3 on: November 25, 2009, 09:54:57 AM »
Dont forget to come out and work on your favorite course on Friday 11-27-09. We will be working at 9am till whenever. I will be up top in the parking lot by 9am. My primary focus will be on a few new pin placements, trash, and getting sand down to a few boxes, and finally cutting a few dead trees.

See you all at 9am.

Thanks

Brad
« Last Edit: November 25, 2009, 10:00:34 AM by bbman »
Rosedale Down Under CC 2010

Dan Weinert

  • 1000 Rated Poster
  • ***
  • Posts: 1722
  • PARADISE ROCS!!!
    • View Profile
Re: Down Under Work Day 11-27-09///New Pin placements//Tee Boxes
« Reply #4 on: November 26, 2009, 02:00:28 PM »
Brad,

I am coming with the Quad and trailer...the only way that works is if we got buckets...lots of buckets.

Shovels and rakes that you mentioned are also needed.

Any idea on bucket count sir?

Dan
816-812-6265
For a good time: Lat- 3925'8.92"N, Long- 9433'18.52"W

bbman

  • Moderator
  • Pro Poster
  • *****
  • Posts: 263
    • View Profile
Re: Down Under Work Day 11-27-09///New Pin placements//Tee Boxes
« Reply #5 on: November 26, 2009, 02:40:50 PM »
I think I have about 10. However about 5 of them i will be using for water for the concrete.


So anybody that is comming if you have buckets BRING THEM

Thanks Dan well see you in the morning SIR.

Brad
Rosedale Down Under CC 2010

Adam Witt

  • Am Poster
  • *
  • Posts: 31
    • View Profile
Re: Down Under Work Day 11-27-09///New Pin placements//Tee Boxes
« Reply #6 on: November 27, 2009, 08:59:39 AM »
damn Brad 9:00 am? Some of us (ME) are still a little hung over! You know I will be there just late though!
Congrats on C.C. position!!! We all know you will get alot done, I will help any way I can.
rockin out with my disc out!

Dan Weinert

  • 1000 Rated Poster
  • ***
  • Posts: 1722
  • PARADISE ROCS!!!
    • View Profile
Re: Down Under Work Day 11-27-09///New Pin placements//Tee Boxes
« Reply #7 on: November 28, 2009, 07:20:28 AM »
Fun work day yesterday...we got alot done! Wait till you see the signature hole that was installed...it's awesome!

Here are a few pics from the day.


Breaking new ground!

X marks the spot! (Brad's dig here mark!)

Breaking new ground here too!

Was cool to use the iPhone level tool to set the new pen locations nice and plumb...yea there's an app for that.

Dan  8)

PS- Thanks for the Z-Man Brad...that and the round afterwards always makes the workdays at Rosey FUN!!!!
For a good time: Lat- 3925'8.92"N, Long- 9433'18.52"W

AreBeezy

  • Am Poster
  • *
  • Posts: 122
    • View Profile
Re: Down Under Work Day 11-27-09///New Pin placements//Tee Boxes
« Reply #8 on: November 28, 2009, 02:36:59 PM »
What hole did you put the "signature pin placement on?"
If the moon was just a disc, where would it's basket be?  Saturn?

bbman

  • Moderator
  • Pro Poster
  • *****
  • Posts: 263
    • View Profile
Re: Down Under Work Day 11-27-09///New Pin placements//Tee Boxes
« Reply #9 on: November 28, 2009, 04:51:53 PM »
Well let me recap the day.

Hole 16 got three new placements
1. Short
2. Long Left
3. Super Long and Straight

Hole 12 got one new placement
1. Long straight

Hole 11 Got the new signature placement.
1. Go play next week after Tuesday and you will see.

We also got sand down to box 1 and box 6, a bit of trash was also removed.

I would like to thank the following people for making this work day a success.

Dan Weinert-- Couldn't have been done without you "oh yea I guess the Quad helped a bit".
Dusty-- Thanks again for the work
John Theiss-- Thanks for coming and bringing the chainsaw.
Mike Keizer-- Thanks alot and you and John did great on 16.
Steve Hostetler-- Coudn't have been done without you. Thanks for all your help.

Again Thanks to everyone that came out and made this a success, I played DU league today and had many good compliments, So great job guys.


Oh yea and to whomever did the new bench on 14 good work.
« Last Edit: November 28, 2009, 05:01:04 PM by bbman »
Rosedale Down Under CC 2010

john theiss

  • Pro Poster
  • **
  • Posts: 849
    • View Profile
Re: Down Under Work Day 11-27-09///New Pin placements//Tee Boxes
« Reply #10 on: November 28, 2009, 10:14:41 PM »
some down under tees are looking super nice.  each year it gets nicer and nicer. damn, if more people helped steve, we would have the best natural tee pads i have ever seen in the US.  i do not know who can argue with what you all are doing and i am in for your next work day.  it is really amazing and remarkable.  that is great stuff guys.  damn, some of those pads are straight up professional style and you folks out there that play on  saturdays enjoy the labor of love from Steve and others.  great job.  those stones around  some of the pads are set with perfection and look amazing.  top notch!!!  wow!!   DU is just getting better and better.  The baskets, the pads, the tee signs, the directional signs from Keizer, etc, it is looking fantastic and is such a gem. I had such a great time playing with the great guys that came out and helped out for the work day.  It really is not work.   Such a great time.  go work and then play!!!   
that was a great day!

John

dickthediscparker

  • 1000 Rated Poster
  • ***
  • Posts: 3022
    • View Profile
Re: Down Under Work Day 11-27-09///New Pin placements//Tee Boxes
« Reply #11 on: November 29, 2009, 09:03:08 AM »
Ya Kiezer.  Nice directional signs :) *hides orange paint can behind back*
..sS{Dick Parker}Zz...
Disc Golf Course Designer
Freelance Graphics Artist

CD

  • The "Compact" Disc Player
  • Administrator
  • 1000 Rated Poster
  • *****
  • Posts: 1537
  • Don't EVER forget to putt out. Period.
    • View Profile
    • http://MOKANdiscgolf.org
Re: Down Under Work Day 11-27-09///New Pin placements//Tee Boxes
« Reply #12 on: November 29, 2009, 10:56:18 AM »
Agreed that DU is looking awesome! Way to 'bee all!!
Duane "CD" Steiner
Team INNOVA Ambassador
Independence MO
PDGA #2883; KCFDC #002
Bagtags:
2014: 3, 17, 46, 36, 12, 22, 36
"Sometimes it's better to be looked over than to be overlooked."

bbman

  • Moderator
  • Pro Poster
  • *****
  • Posts: 263
    • View Profile
Re: Down Under Work Day 11-27-09///New Pin placements//Tee Boxes
« Reply #13 on: November 30, 2009, 08:12:58 AM »
New suprise pin location on 6. You shall see it in a few days.
Rosedale Down Under CC 2010

chi chi rodweez

  • Am Poster
  • *
  • Posts: 132
    • View Profile
Re: Down Under Work Day 11-27-09///New Pin placements//Tee Boxes
« Reply #14 on: November 30, 2009, 09:52:19 AM »
thanks guys to all who've made DU look F-in awesome.  Played there yesterday morning and everyone in our group commented how great it looks.