10' diameter spoke master- DONE!
Mark t-pad final locations with Mr. Parker- DONE!
The plan is as follows-1. Have the park level the t-pad locations.
2. Set spoke master in position & level.
3. Wrap bender board around spoke master & stake to the ground.
4. Remove spoke master.5. Add gravel & mesh.
6. Add cool colored concrete.
7. Finish concrete.
8. Heavy brush texture, perpendicular to the basket.
9. Remove form.
10. Back fill up to edge of t-pad.
11. Repeat 17 times.
12.
Enjoy 18 beautiful, perfect round t-pads!!!!!!