HELP NEEDED MONDAY 8/6, 9AM AT CLIFF DRIVE!!!!

[Mike Hyzer]

I realize this is very short notice, but figured it was worth a shot. I need someone to meet me at Cliff Drive at 9am tomorrow (Monday, 8/6) to help nail some concrete forms together and level them out. Just really need an extra pair of hands. We were not able to complete the forms this weekend, and they have to get done tomorrow. The wood is already cut, and I have a framing nailer and air compressor so this shouldn't take long as there are only two forms to build.

If you are free in the morning and can come out, just meet me at the hanging basket on Hole #8 at 9am. Message me on here if you have any questions.

[jack]

I wish I could be there Mike....DANGIT!! 

[jack]

This just in Photos of the forms done.  I will call to get some rock delivered, now looking for a few people to be on call for the finishing of the concrete when it arrives...

[Mike Hyzer]

HUGE THANKS...


...to Josh Harvey for coming all the way out from Olathe to help with the forms. We rocked them out in no time flat. To those who didn't show up, we probably got more done without you in our way.

Good to meet you this morning, Josh!

[jack]

Thanks guys.  I heard that we are having the concrete poured today as well.  Should be exciting!

[Disciple]

Happy to help.
Frame pic teaser--> http://instagr.am/p/N_y4H5wxHD/
Pawpaw fruit --> http://instagr.am/p/N_0eIqQxIL/
JH

[jack]

The Lion's Den isn't just about division of people.  It is a uniting factor that brings all together to enjoy a place called Cliff Drive Disc Golf course.....now complete with the first on course Stage........well the drummers stage was done, I am not sure if there is enough concrete for the main stage yet.....more to follow!

[Mike Hyzer]

The drum pad should be complete. When I left, we had run out of concrete, so Arturo is just going to level out what was available on the main stage. What we'll end up with, for now, should be a "base layer" of concrete that will  be capped off when the driver gets another load of extra mix.

It is going to be so friggin' cool when it's done.

[dickthediscparker]

Actally we may just finish it with what we have. I will post pictures of the progress. And Jack will likely follow up with a finished photo this evening.

[Mike Hyzer]